How To Cut Pavers With An Angle Grinder

Milling can seem very annoying, especially if you do not have the right tools. Angle grinders can be very effective in this case. The angle grinder is a portable power tool used for cutting and polishing with abrasives.

On the other hand, an asphalt paver is a building block, brick or concrete used to lay asphalt on surfaces such as roads, paths and bridges. In this article we give you detailed information about How to grind paving stones with angle grinder.

However, always wear protective glasses, as fine splinters can get into the eye. Don’t worry, it’s a fun activity.

How to make an asphalt finish with an angle grinder (step-by-step instructions)

When cutting paving tiles, tiles or slabs, or even bricks. Other angle grinders, such as side corners, are very useful for work. It is very effective for cutting any kind of stone you come across.

However, you must be very careful and safe when using tool to avoid injury in zone.


# Step 1: Wear protective clothing

This operation isn’t life-threatening, so don’t worry. However, you must wear several protectors during cutting. For example, good dust masks and goggles to protect your eyes from the small shards of of paver that can get into your eye.

word image 13

You should also wear hearing protection because the cutting process is quite noisy. It is also advisable to use a pair of gloves.

# Step 2: Choose the right tool

Did you know that there are two types of grinders, depending on the size of the grinding wheel? Angle grinders are available with two main wheel sizes: 115 mm and 230 mm. The smaller one cannot cut deep compared to the larger one.

It is therefore advisable to choose the right type of angle grinder. For example, you need a larger plate to cut large slabs and a smaller brick to cut smaller bricks.

# Step 3: Quality maintenance Drives

If you get the best quality, you don’t have to choose the cheapest one, it can help you get back to the source. If you want a straight and clean cut, diamond blades are the right choice for you. They also last longer than cheap grindstones.

You can now install your angle grinder with a diamond wheel to cut the paving stones to be laid.

Here you can learn how to remove a disk.

# Step 4: Bookmark

It’s a piece of cake: Simply measure the space to be filled when paving and transfer this measurement to the paving. You can do it with a pencil to mark the sidewalk.

# Step 5: Correct hardware adjustment

After marking, the paving can be placed on a flat surface. You can make it happen from the ground up. The position of the angle grinder must not come into contact with the ground. It’s easy, isn’t it?

# Step 6: Cutting

You can now place the paving in such a way that the part with the jagged line is at the end and hangs over it. You can now cut the finisher accurately by following your created marker .

Once you get used to it, it becomes exciting and easy. First take the time to master the concept. You’re a professional finisher now.

Concrete Cutting Professionals in Melbourne. Save Money, Save Time.

It is recommended not to force the knife when uses angle grinder to cut the finisher. He can break a knife, but he can also make a knife leap in the face.

I know you don’t want to go through this. It is your duty to guide the blade carefully and prevent it from being driven by force. It will be useful because the wreckage will be flown back to you.

Another safety point is that the safety device on your tool must always be switched on. Always be careful never to remove it, and if you can borrow an angle grinder from someone else, check the tool for and make sure the protector is in place before using it.


Disclosure: We are a professional review company & our reviews are not biased towards any of the products we review. We test each product thoroughly and give marks to only the very best that is given by our author. We are very independently owned & the opinions expressed here are our own. However, if you purchase anything after clicking the links present in the articles then we get some commissions for it which help maintaining the websites expenses like servers, security etc.